What is Phoenix?

What is Phoenix?

The PhoenixSentry™ is a complete end-to-end system developed by FSI Systems providing you the ability to monitor almost anything from anywhere. The system collects data via a series of sensors from your equipment. The system connects to your equipment via sensors that are selected for your particular application. The applications include:

  • Level and flow sensing for metering processes – water, chemical, etc.
  • Temperature sensors for monitoring alarm conditions – food storage, process temperature
  • Energy metering sensors – voltage and current, power factor and phase balance as well as peak demand alarming for energy cost reduction
  • Many, many more

The PhoenixSentry™ today supports over 500 sensors and new devices are added every day. In fact, we can add a sensor device for you not currently supported for little to no charge, depending on the sensor type!

 

What is required?

 

  • PhoenixSentry™ electronics module in a Nema 4 ruggedized enclosure
  • AC power connection
  • Internet Connection
    • Direct cable connect (via router or switch) – IE Time Warner, Rogers Cable, Etc. OR
    • Telephone connect OR
    • Cellular modem (supplied)
  • Sensors – these are determined by your monitoring choices and are supplied by you (optionally supplied if requested)

The electronics have been designed to withstand temperature extremes and are enclosed in a weatherproof NEMA 4 rated enclosure. The unit may be mounted inside or outside with no detrimental effects. Many installations today are municipal based and operate outdoors 24/7/365 without the need for maintenance.







Attached File: slide1-applications.jpg